Driver Device Installation with NFC

Modified on Thu, 1 Aug at 12:54 PM

Driver Device Installation with NFC on Biteable.

the unit consists of three parts - the scanning device, the mount and the 12 volt plug

place the suction cup on the windscreen and turn it to the locked position

adjust the unit by turning the knob and moving as necessary and then tighten when in the correct position

insert the 12 volt plug into the port and the USB cable into the 12 volt plug or into the inbuilt USB port

place the unit in a position that both a driver can read the screen and a student can access the NFC Reader on the back of the device

attach an NFC extension mount to the scanning device and place the extension reader in the designated position

NOTES:

NFC Extenders are required if the device is not able to be mounted where it is accessible to both the driver and passengers
The mount and device supplied are paired and may not be interchangeable with other devices supplied.
When requesting a replacement device, please also provide details of the mount. There are two main types – Gripped (device slides into holder) and Quad Lock (device in cover with twist fit)